How to remove (for good) white spots from the induction plate

A as it is being used, the surface of an induction plate may lose brightness when it is not cleaned properly. This is due to the accumulation of food waste, water limestone and cleaning products. 

Experts have revealed to Martha Stewart's website how to remove them.

Why do the white spots appear on the induction plates?

These stains can have several causes. Here are the most common: 

Metal contact

Matthew Morrison, a specialist in home appliances, points out that the most common cause is to move metal objects on top of the board. 

This phenomenon occurs more frequently when copper or aluminium pots are used at high temperatures. 

During this process, microscopic particles of metal bottom of the pan are transferred to the microscopic pores of the glass ceramic plate, giving rise to these spots.

Food waste

Cleaning professional Ashley Torres notes that white film may be the result of a combination of burnt food waste, limestone deposits and scraps of cleaning products. The ideal will be to clean the liquids as soon as possible. 

Aggressive cleaning

The specialist in home appliances Ilaria Castagnoli states that these spots can be caused by small risks left by abrasive kitchen utensils or sponges and cleaning.

How to remove white spots from the induction plate

Dishes detergent:

1. Prepare warm water, neutral detergent and microfiber cleaning cloths. Make sure the stove is completely cold;

2. Mix a few drops of neutral detergent in warm water;

3. Wet the cloth in the solution and then clean the entire surface of the stove;

4. Remove the soap residue with a water-moistened microfiber cloth;

5. Dry the surface immediately with a dry microfiber cloth.

With cleansing vinegar

1. Moisten a microfiber cloth with cleansing vinegar; 

2. Gently cleanse the area of the trunks;

3. Clean the surface again with a clean, damp cloth;

4. Dry with a clean, dry microfiber cloth.

Cleaning vinagre and baking soda

1. Spray vinegar on the surface and let it act for 5 minutes;

2. Sprinkle sodium bicarbonate on the moist surface;

3. Wait 10 minutes;

4. Gently wipe with a damp microfiber cloth;

5. Repeat as needed.

How to prevent the induction plates from getting messy

“ Be proactive and consistent with regular cleaning,” Morrison advises. Prevention is essential for proper maintenance of the stove. 

Note these tips: 

– Use the right utensils: make sure that your utensils, such as pans and pans, are cleaned properly. 

– Avoid dragging: when using glassware and cast iron be careful and avoid dragging them on the stove. Make sure that the pans and pans are free of waste, as well as any fat burned at the bottom that may damage the plate;

– Choose the cleaning products well: avoid too corrosive or abrasive;

– Keep a Routine: clean the plate as soon as it cools;

– Use cleaning products in moderation: if the cleaning product is not completely removed it can dry and leave marks.